Raisonance provides daughter boards that can be used on the REva board which is part of different ST7, STR7, STR9 or STM32 starter kits: ST7LITE-SK, ST7232x-SK, ST7263B-SK, ST7234x-SK, ST72361-SK, STR71x-SK, STR730-SK, STR750-SK, STR91x-SK, STM32103R.
Note that these daughter boards can be purchased separately (see Ordering information below)

The daughter boards contain all the components dedicated to a specific target, including the microcontroller itself, a clock selector and other device dependent features.

! Important !
Note that The different ST7xx-DB daughter boards can also be used with the STRxxx-SK starter kits for debugging and programming, while the different STRxxx-DB daughter boards can be used with the ST7xx-SK or uPSD-SK starter-kits only for programming (available for BN 7.43 or better).

Reference	On board microcontroller	Supported microcontrollers	Features
ST7LITE0-DB	ST7LITE09	ST7LITESx  ST7LITE0x	four-position jumper to select the clock source some passive devices for decoupling and managing reset priorities a footprint for throughhole oscillators (oscillators not provided)
ST7LITE1B-DB	ST7LITE19B	ST7LITE1x  ST7LITE1xB	six-position jumper to select the clock source, some passive devices for decoupling and managing reset priorities a footprint for throughhole oscillators (oscillators not provided)
ST7LITE3-DB	ST7LITE39	ST7LITE1x  ST7LITE2x  ST7LITE3x	six-position jumper to select the clock source, some passive devices for decoupling and managing reset priorities a footprint for throughhole oscillators (oscillators not provided)
ST7LITEU0-DB	ST7LITEU0-ICD	ST7LITEU0x  ST7FOXA0	four-position jumper to select the clock source, some passive devices for decoupling and managing reset priorities a footprint for throughhole oscillators (oscillators not provided)
ST7LITE4M-DB	ST7LITE49M	ST7LITE49M  ST7FOXF1  ST7FOXK1	four-position jumper to select the clock source, some passive devices for decoupling and managing reset priorities a footprint for throughhole oscillators (oscillators not provided)
ST72321B-DB	ST72321BR	ST72(F)325R  ST72(F)321(B)R  ST72(F)324(B)R	six-position jumper to select the clock source some passive devices for decoupling and managing reset priorities a footprint for throughhole oscillators (oscillators not provided)
ST72325-DB	ST72325R	ST72(F)325R  ST72(F)321(B)R  ST72(F)324(B)R	six-position jumper to select the clock source some passive devices for decoupling and managing reset priorities a footprint for throughhole oscillators (oscillators not provided)
ST7263B-DB	ST7263B	ST72(F)63BH	six-position jumper to select the clock source 1 USB Mini-B connector some passive devices for decoupling and managing reset priorities a footprint for throughhole oscillators with a 24 MHz oscillator
ST72264-DB	ST72264	ST72(F)26xG	six-position jumper to select the clock source some passive devices for decoupling and managing reset priorities a footprint for throughhole oscillators (oscillators not provided)
ST72345-DB	ST72345C4	ST72(F)340C  ST72(F)344C  ST72(F)345C	six-position jumper to select the clock source some passive devices for decoupling and managing reset priorities a footprint for throughhole oscillators (oscillators not provided) two-position jumper to select VDD voltage
ST72361-DB	ST72361	ST72(F)36xAR  ST72(F)56xAR	six-position jumper to select the clock source 1 hole for a Test Point to use the TLI input of the microcontroller some passive devices for decoupling and managing reset priorities 1 USB Mini-B connector a footprint for throughhole oscillators with a 24 MHz oscillator
STR711F-DB	STR711F	STR711F	two-position jumper to select the boot mode oscillator for main clock and USB clock generation (4MHz) 32kHz crystal for RTC operation USB mini-B connector some passive devices for decoupling and managing reset priorities
STR712F-DB	STR712F	STR712F	two-position jumper to select the boot mode three-position jumper to configure the CAN peripheral CAN bus driver oscillator for main clock and USB clock generation (4MHz) 32kHz crystal for RTC operation some passive devices for decoupling and managing reset priorities.
STR730F-DB	STR730F	STR730F	six-position jumper to configure the boot (pins M0 and M1), six-position jumper to choose which CAN peripheral to connect on the SER2 connector, 2 three-position jumper to configure the CAN peripherals, 2 CAN bus drivers (bottom side), 8MHz crystal for main clock, some passive devices for decoupling and managing reset priorities.
STR750F-DB	STR750F	STR750F	2 two-position jumpers to configure the boot mode (RAM or FLASH), 1 three-position jumper to configure the CAN peripherals, 1 USB connector for USB peripheral, 4MHz crystal for main clock, some passive devices for decoupling and managing reset priorities.
STR912-DB	STR912F	STR912F	1 CAN bus driver (bottom side), 1 quartz for main clock and USB clock generation (25 Mhz), 1 quartz for RTC operation (32 kHz, bottom side), 1 USB mini-B connector, 1 Ethernet transceiver, port and transformer, 1 infra-red sensor (for IrDA feature), 1 38-pin Mictor connector (for ETM Trace feature), some passive devices for decoupling and managing reset priorities.
STM32103R-DB	STM32103R	STM32103R	1 CAN bus driver (bottom side), 1 quartz for main clock and USB clock generation (8 Mhz), 1 quartz for RTC operation (32 kHz), 1 USB mini-B connector, various jumpers for the chip configuration (boot mode, Vbat and CAN mode), some passive devices for decoupling and managing reset priorities.

Ordering Information

You can order daughter boards:

• From this web site (on-line payment):
  ST7LITE0-DB,
  ST7LITE1B-DB,
  ST7LITE3-DB,
  ST7LITEU0-DB,
  ST72264-DB,
  ST72345-DB,
  ST72325-DB,
  ST72321B-DB,
  ST7263B-DB,
  ST72361-DB,
  STR711F-DB,
  STR712F-DB,
  STR730F-DB,
  STR750F-DB,
  STR912F-DB,
  STM32103R-DB.
• By email: sales@raisonance.com
• By phone +33 4 76 610 230
• By fax +33 4 76 418 168

To find the distributor nearest you click here.