|
RKit-STRx
The RKit-STRx software toolchain includes GNU Tools (C Compiler,
Assembler and Linker), Simulator/Debugger,
PDK and drivers for the STR7 (ARM7) evaluation
boards and emulators. All these tools are integrated into RIDE.
RIDE
RIDE is the Raisonance Integrated Development Environment. It allows to manage all the
software and hardware tools for the best ease of use.
2 versions of Ride are available and support ARM development tools:
Ride6 and
Ride7.
GNU Tools
STR7 (ARM7) GNU tools are fully integrated into RIDE, so that there is no need for makefiles or complex command lines.
There are also some specific libraries that are provided for a better adaptation to the STR7 (ARM7) microcontrollers:
- The STR7 libraries from ST allow a quick configuration and simple use of the embedded peripherals.
- The original ANSI libraries from GNU (scanf, printf, ...) have been simplified and optimized to match with
the embedded world requirements
The GNU C Compiler is reliable and very optimizing. You can look at the Benchmarks for comparison with other
ARM Compilers.
Simulator
RIDE provides a simulator capable of simulating the ARM instructions set and makes it possible to check the
interaction between the application code and a peripheral before going on to debug with an in-circuit debugger as (RLink)
or emulator (as JTAGjet-ETM).
Drivers
USB drivers for RLink and JTAGjet are included in the software kit.
RFlasher
RFlasher is a user-friendly programming interface allowing you to program the flash memory.
It is only available with Ride6 for now.
Hardware Tools
RLink
In addition to the Raisonance simulator, RIDE can be used with a number of hardware debugging tools,
including the Raisonance RLink for in-circuit debugger & programmer.
Two box versions are available for STR7 devices: RLink-std and RLink-Pro.
RLink-std is the standard version it allows you to program without any resctrictions and to debug up to 32KB (With RIDE build BN 7.47 and higher).
Rlink-Pro is the professional version. It allows complete programming and debugging for devices supported by Ride.
More information about RLink...
JTAGjet-ETM
JTAGjet-ETM is a small, palm-sized In-Circuit Debugger dedicated to supporting the
STMicroelectronics family of ARM based microcontrollers. It supports all ARM7 based devices
from STMicroelectronics, including: STR71x, STR72x and STR73x. It has been developed by Signum Systems.
REva
Raisonance has also developed a Universal Development Board named REva. This board is fully managed
by RIDE allowing to debug and program directly on it.
Up to now, daughter boards with STR711F-DB, STR712F-DB,
STR730F-DB or STR750F-DB
are available, allowing support for the following components:
- STR711F
- STR712F
- STR730F
- STR750F
RDI Driver (Optional)
The RDI (Remote Debug Interface) driver can be used with RLink for the STR processors. It allows you
to use third party debuggers in order to debug with the Raisonance RLink-Pro. It has been developed by
Signum Systems. You can get it from their web page.
|
Products
Below is the list of the different STR7 products available from Raisonance to develop your applications on STR7 devices.
|
|
| PRODUCT |
PART NUMBER |
TOOLS |
LIMITS |
| Standard Package |
|
For STR7 & STR9 families.
RIDE, GNU C Compiler, GNU Assembler, GNU Linker, Simulator/Debugger, RFlasher |
No Limitation
Free
Download here
|
| RLink standard |
|
RLink-STD standard debugging & programming tool, RKit-STRx (see above), RFlasher |
Debug < 32K; |
| Starter-Kit |
|
RKit-STRx (see above), REva (Universal Evaluation Board), Daughter boards (STR711F-DB and STR712F-DB), unlimited FLASH programming |
Debug < 32K; |
| Starter-Kit |
|
RKit-STRx (see above), REva (Universal Evaluation Board), Daughter board (STR730F-DB), unlimited FLASH programming |
Debug < 32K; |
| Starter-Kit |
|
RKit-STRx (see above), REva (Universal Evaluation Board), Daughter board (STR750F-DB), unlimited FLASH programming |
Debug < 32K; |
| STR71x Daughter Boards |
|
Daughter Board to be plugged on the REva mother board for the STR7xx-SK Starter Kit |
- |
|
|
| STR730 Daughter Board |
|
Daughter Board to be plugged on the REva mother board for the STR7xx-SK Starter Kit |
- |
| STR750 Daughter Board |
|
Daughter Board to be plugged on the REva mother board for the STR7xx-SK Starter Kit |
- |
| RLink professional |
|
RKit-STRx (see above), RLink-Pro (no debugging limitation) professional in-circuit debugging & programming tool |
No Limitation |
| Upgrade to RLink Pro |
|
RKit-STRx (see above), RLink-Pro (no debugging limitation) professional in-circuit debugging & programming tool |
Reserved for STR7xx-SK Starter-Kit owners |
| ETM kit |
JTAGjet-Trace-STM |
RKit-STRx (see above), JTAGjet ETM emulator for STR7, RDI driver, REva for STR7, Daughter boards, RFlasher |
No Limitation |
Ordering information
These products can be ordered:
- From this web site (payment on-line):
- By email: sales@raisonance.com
- By phone: +33 4 76 610 230
- By fax: +33 4 76 418 168
Additional resources:
|
