|
RKit-STR9
The RKit-STRx software toolchain includes GNU Tools (C Compiler,
Assembler and Linker), Simulator/Debugger, PDK and
drivers for the STR9 (ARM9) evaluation boards and emulators.
All these tools are integrated into RIDE.
RIDE
RIDE is the Raisonance Integrated Development Environment. It allows to manage all the
software and hardware tools for the best ease of use.
2 versions of Ride are available and support ARM development tools:
Ride6 and
Ride7.
GNU Tools
STR9 (ARM9) GNU tools are fully integrated into RIDE, so that there is no need for makefiles or complex command lines.
Moreover, some specific libraries are provided for a better adaptation to the STR9 (ARM9) microcontrollers:
- The STR9 libraries from ST allow a quick configuration and simple use of the embedded peripherals.
- The original ANSI libraries from GNU (scanf, printf, ...) have been simplified and optimized to match with
the embedded world requirements
The GNU C Compiler is reliable and very optimizing.
Simulator
RIDE provides a simulator capable of simulating the ARM instructions set and makes it possible to check the
interaction between the application code and a peripheral before going on to debug with an in-circuit debugger as (RLink)
or emulator (as JTAGjet-TRACE-ST).
Drivers
USB drivers for RLink and JTAGjet are included in the software kit.
RFlasher
RFlasher is a user-friendly programming interface allowing to program the flash memory.
It is only available with Ride6 for now.
Hardware Tools
RLink
In addition to the Raisonance simulator, RIDE can be used with a number of hardware debugging tools,
including the Raisonance RLink for in-circuit debugger & programmer.
Two box versions are available for STR9 devices: RLink-std and RLink-Pro.
RLink-std is the standard version it allows to program without resctriction and to debug up to 32KB (With RIDE build BN 7.47 and higher).
Rlink-Pro is the professional version. It allows complete programming and debugging for devices supported by Ride.
More information about RLink...
JTAGJET-TRACE-ST
JTAGJET-TRACE-ST is a small, palm-sized In-Circuit Debugger dedicated to supporting the
STMicroelectronics family of ARM based microcontrollers. It supports all ARM9 based devices
from STMicroelectronics, including: STR91x. It has been developed by Signum Systems.
REva
Raisonance has also developed a Universal Development Board named REva. This board is fully managed
by RIDE allowing to debug and program directly on it.
Up to know, daughter board with STR912F-DB
is available, allowing support for the following components:
RDI Driver (Optional)
The RDI (Remote Debug Interface) driver can be used with RLink for the STRx processors. It allows
to use third party debuggers in order to debug with the Raisonance RLink-Pro. It has been developed by
Signum Systems. You can get it from their web page.
|
Products
Hereafter is the list of the different STR9 products available from Raisonance to develop your applications on STR9 devices.
|
|
| PRODUCT |
PART NUMBER |
TOOLS |
LIMITS |
| Standard Package |
|
For STR7 & STR9 families.
RIDE, GNU C Compiler, GNU Assembler, GNU Linker, Simulator/Debugger, RFlasher |
No Limitation
Free
Download here
|
| RLink standard |
|
RLink-STD standard debugging & programming tool, RKit-STRx (see above), RFlasher |
Debug < 32K; |
| Starter-Kit |
|
RKit-STRx (see above), REva (Universal Evaluation Board), Daughter board (STR912F-DB), unlimited FLASH programming |
Debug < 32K; |
| STR91x Daughter Board |
|
Daughter Board to be plugged on the REva mother board for the STRxx-SK Starter Kit |
- |
| RLink professional |
|
RKit-STRx (see above), RLink-Pro (no debugging limitation) professional in-circuit debugging & programming tool |
No Limitation |
| Upgrade to RLink Pro |
|
RKit-STRx (see above), RLink-Pro (no debugging limitation) professional in-circuit debugging & programming tool |
Reserved for STR9xx-SK Starter-Kit owners |
| Development Kit |
|
RKit-STRx (see above), JTAGjet-Trace-STM emulator with Trace for STR9, RDI driver, REva, STR912F-DB Daughter board |
No Limitation
Trace available |
Ordering information
These products can be ordered:
- From this web site (on-line payment):
- By email: sales@raisonance.com
- By phone: +33 4 76 610 230
- By fax: +33 4 76 418 168
Additional resources:
|
