sitemap
|
ST7 STARTER
KITS
ST7xx-SK
|
|
The Raisonance ST7 Starter-kits offer a complete,
flexible, and affordable software and hardware development solution for ST7 applications.
It provides real-time in-circuit debugging and programming capabilities, with all the features
needed to allow developers to create, build, and debug ST's MCU-based systems.
The Starter-kit provides the perfect path to start with the ST7 family since there is no limitation,
neither for debugging, nor for programming ST7 devices supported by RIDE.
Starter-kit includes:
- REva mother board,
- RLink attached to the mother board,
- REva daughter board(s), depending on the purchased kit:
- ST7LITE-SK includes four daughter boards: ST7LITE0-DB, ST7LITE1B-DB, ST7LITE3-DB and ST7LITEU0-DB,
- ST7232x-SK includes two daughter boards: ST7321B-DB and ST72325-DB,
- ST7263B-SK includes one daughter board: ST7263B-DB,
- ST7234x-SK includes two daughter boards: ST72345-DB and ST72264-DB,
- ST7236x-SK includes one daughter board: ST72361-DB,
- all required cables,
- RAISONANCE software CD including RKit-ST7 with RIDE,
- QuickStart tutorial.
|
|
The REva mother board
|
|
REva is the Raisonance's Universal
Evaluation Board that allows quick, easy evaluation of a wide range of microcontrollers.
This innovative modular platform consists of a generic motherboard with interchangeable daughter boards
supporting several target microcontrollers and an embedded RLink in-circuit programmer and debugger.
The REva's key features include:
- Digital and analog I/O evaluation features including on-board LEDs, buttons,
switches, external analog connector, temperature sensor and
potentiometer,
- On-board I²C EEPROM and bus extension connector,
- On-board RS232 driver and DB9 connector,
- SPI, CAN and USB connections (depending on the target device).
- Embedded RLink for in-circuit debugging and in-circuit programming.
|
|
RLink
RLink is Raisonance's versatile, very low cost, high-performance in-circuit
debugger and programmer for STR7, µPSD (8051) and ST7. RLink, driven by the Raisonance's Integrated
Development Environment (RIDE), provides USB to host PC interface and connects to a user application board for
in-circuit programming/debugging thanks to the serial protocol used by the target microcontroller.
For the ST7xx-SK starter kits, RLink allows:
- unlimited FLASH programming,
- unlimited debugging
RLink's USB connection is used to power the REva, eliminating the need for a power supply.
The RLink also connects to the target ST7 in the application through a standard 10-pin ICC
(In Circuit Communication) interface, using the ST7 ICC protocol.
|
|
RKit-ST7
The free RKit-ST7 software toolchain includes RBuilder, C Compiler (1KB), Assembler, Linker, Simulator and CodeCompressor,
all integrated into Raisonance' Integrated Development Environment (RIDE) for the best ease of use.
|
Daughter Boards
The daughter boards contain all the components dedicated
to a specific target, including the microcontroller itself, a clock selector and other device
dependent features.
ST7LITE-SK
ST7LITE-SK includes four daughter boards ST7LITE0-DB,
ST7LITE1B-DB, ST7LITE3-DB
and ST7LITEU0-DB
ST7232x-SK
ST7232x-SK includes two daughter boards ST72325-DB and ST72321B-DB
ST7234x-SK
ST7234x-SK includes two daughter boards ST72345-DB and ST72264-DB
ST7236x-SK
ST7236x-SK includes one daughter board ST72361-DB
ST7263B-SK
ST7263B-SK includes one daughter board ST7263B-DB
Important:
The different ST7xx-DB daughter boards can be used with the STR7xx-SK starter kits for full
debugging and programming, while the STR7xx-DB daughter boards can be used on the ST7xx-SK starter-kits
only for programming (for BN 7.43 or better).
|
|
Ordering Information
Price list for ST7 tools.
You can order these starter-kits:
To find the distributor nearest you click here.
|
|
|
