Home

STX-RLINK

STX-RLINK is the STMicroelectronics' part number for the Raisonance RLink-STD or "Standard". The two products are technically identical, support the same range of microcontrollers and the same performance characteristics using the same software packages.

For more than a decade Raisonance provided the RLink to STMicroelectronics for resale as the STX-RLINK. ST has since discontinued this resale arrangement, but we continue to support and sell the RLink to support users of STM32 and STM8 microcontrollers. In addition, the RLink supports legacy microcontrollers that are not supprorted by other programmer/debuggers such as the ST7, STR7 and STR9 families of devices.

***

Design, Validate MCU Applications

Raisonance C compilers, programmers, debuggers and evaluations boards support rapid easy creation of applications on a wide range of microcontrollers that implement ARM Cortex-M, 8051, STM8, ST7, PowerPC and CoolRISC architectures. Supported families of devices include the STMicroelectronics' STM32, STM8, ST7 and SPC56; the Silicon Laboratories EFM32 and C8051Fx; as well as specialized low power consumption devices from NXP, EM Microelectronics and Semtech.

Ride7, RLink

Explore NFC & Bluetooth Connectivity

TapNLink Primers help system designers explore the potential for IoT-enabled services and features in their existing electronic designs. Primers provide plug'n play connectivity and a provisioned Cloud service platform so that designers can connect to their systems instantaneously.

Simply plug the TapNLink Primer into the debug port of any STM32 microcontroller, configure the Primer with user profile(s) and the addresses of variables to read and/or write. In no time you'll have data from the system on a mobile phone and on the Cloud! 

End the speculation about IoT potential for your products. With a rapid, low-cost, easily-modified proof-of-concept, explore and validate IoT-enabled features and services today!

Learn More…

TapNLink Primer Evaluation Platform

What's New

Buy STX-RLINK Here

Buy STX-RLINK Here

Your and STX-RLINK user?   RLink supporting STM32, STM8 as well as ST7 and other legacy MCU families is available. Identitcal device support, identical perfomance characteristics.

Purchase yours here !

TapNLink Wins NFC Innovation Award

TapNLink Wins NFC Innovation Award

10 September 2018, Montbonnot France – IoTize TapNLink featuring ST25DV-I2C Dynamic NFC tag wins NFC Forum innovation award in the category ‘Best Emerging Concept’ for its NFC implementation.

TapNLink Primer Instant NFC, BLE for STM32

TapNLink Primer Instant NFC, BLE for STM32

4 September 2018 - TapNLink Primer enables instant NFC and BLE smartphone connectivity on any STM32 application board! Complete evaluation solution instant smartphone user interfaces and Cloud data platform. Only 34.00 Euros.

Just configure TapNLink... and you're connected!

Electronica-Munich

Electronica-Munich

Join us at Electronica in Munich!

November 13-16
Minalogic Pavillion
Hall B5, Booth 350/6

New ARM Toolset

New ARM Toolset

20 April 2018 - New RKit-ARM v1.68.18.0108 is now available!

Adds support of latest STM32H7 and STM32L4 microcontrollers!

IoT Solutions World Congress-Barcelona

IoT Solutions World Congress-Barcelona

Join us at IoTSWC in Barcelona!

October 16-18
Minalogic Pavillion
Stand E - 519