STX-RLINK is the STMicroelectronics' part number for the Raisonance RLink-STD or "Standard". The two products are technically identical, support the same range of microcontrollers and the same performance characteristics using the same software packages.
For more than a decade Raisonance provided the RLink to STMicroelectronics for resale as the STX-RLINK. ST has since discontinued this resale arrangement, but we continue to support and sell the RLink to support users of STM32 and STM8 microcontrollers. In addition, the RLink supports legacy microcontrollers that are not supprorted by other programmer/debuggers such as the ST7, STR7 and STR9 families of devices.
Design, Validate MCU Applications
Raisonance C compilers, programmers, debuggers and evaluations boards support rapid easy creation of applications on a wide range of microcontrollers that implement ARM Cortex-M, 8051, STM8, ST7, PowerPC and CoolRISC architectures. Supported families of devices include the STMicroelectronics' STM32, STM8, ST7 and SPC56; the Silicon Laboratories EFM32 and C8051Fx; as well as specialized low power consumption devices from NXP, EM Microelectronics and Semtech.
Explore NFC & Bluetooth Connectivity
TapNLink Primers help system designers explore the potential for IoT-enabled services and features in their existing electronic designs. Primers provide plug'n play connectivity and a provisioned Cloud service platform so that designers can connect to their systems instantaneously.
Simply plug the TapNLink Primer into the debug port of any STM32 microcontroller, configure the Primer with user profile(s) and the addresses of variables to read and/or write. In no time you'll have data from the system on a mobile phone and on the Cloud!
Buy STX-RLINK Here
Your and STX-RLINK user? RLink supporting STM32, STM8 as well as ST7 and other legacy MCU families is available. Identitcal device support, identical perfomance characteristics.
Purchase yours here !
TapNLink Wins NFC Innovation Award
10 September 2018, Montbonnot France – IoTize TapNLink featuring ST25DV-I2C Dynamic NFC tag wins NFC Forum innovation award in the category ‘Best Emerging Concept’ for its NFC implementation.
TapNLink Primer Instant NFC, BLE for STM32
4 September 2018 - TapNLink Primer enables instant NFC and BLE smartphone connectivity on any STM32 application board! Complete evaluation solution instant smartphone user interfaces and Cloud data platform. Only 34.00 Euros.
Just configure TapNLink... and you're connected!
New ARM Toolset
20 April 2018 - New RKit-ARM v1.68.18.0108 is now available!
Adds support of latest STM32H7 and STM32L4 microcontrollers!
IoTize Announces Move to New Site
18 June 2018, Montbonnot, France – All IoTize operations move to new, larger facility.
New STM8, ST7 Software Toolset
30 Oct 2017 - RKit-STM8 2.62.17.0263 new release extends support for new STM8 variants.